Personal Information

Dr. Chandan Kumar

Assistant Professor and Coordinator
Department of Biomedical Engineering

Ph.D.(IIT-BHU, Varanasi), M. Tech (NIT-Rourkela),GATE-Electronics & Instrumentation , B.Tech. (ITM University)

[email protected]

91
  • Piezoelectric energy harvesting
  • Sensors
  • Biomedical devices
  • Wearable electronics
  • Flexible electronics
  • 2018 Ph.D., Indian Institute of Technology, Varanasi,
  • 2013 M.Tech., National Institute of Technology,  Rourkela
  • 2010 B.E., Institute of Technology and Management, Gwalior

My research focused on development of standalone efficient energy harvesting systems which provide power to run low-power portable electronics, sensors and biomedical devices. Advancement in micro-fabrication and ultralow-power electronics techniques are now empowering a large range of miniaturized sensors and implantable systems for sensing, health monitoring and deficiency treatments.

My interest also lies in flexible/stretchable electronics because of its wide range of applications.

Candidates interested to pursue postdoctoral research having their OWN fellowship or willing to apply for a postdoctoral fellowship (NPDF, Dr. D S KOTHARI etc) tenable at universities with overlapping research interests are welcome to contact during office hours.

S. No. Authors Title of Article Journal/Conference Details Journal/Conference Publication Year
1 1
  1. Chandan Kumar, Anupama Gaur, Shivam Tiwari, sanjay kumar Rai, Pralay Maiti “Bio-waste polymer hybrid as induced piezoelectric material with high energy harvesting efficiency” Elesevier (DOI 10.1016/j.coco.2018.11.004)
  2. Chandan Kumar, Anupama Gaur, sanjay kumar Rai, Pralay Maiti "Piezo devices using poly (vinylidene fluoride)/reduced graphene oxide hybrid for energy harvesting'' Elesevier; (DOI 10.1016/j.nanoso.2017.10.006)
  3. Shivam Tiwari, Anupama Gaur, Chandan Kumar, Pralay maiti “Enhanced piezoelectric response in nanoclay induced electrospun PVDF nanofibers for energy harvesting”. Energy. (DOI 10.1016/j.energy.2019.01.043 )
  4. Anupama Gaur, Chandan Kumar, Shivam Tiwari, Pralay maiti “Efficient Energy Harvesting Using Processed Poly (vinylidene fluoride) Nanogenerator. ACS; (DOI 10.1021/acsaem.8b00483)
  5. Anupama Gaur, Chandan Kumar, Rahul shukla, Pralay maiti " Induced Piezoelectricity in Poly (vinylidene fluoride) Hybrid as Efficient Energy Harvester" Wiley; (DOI 10.1002/slct.201701780)
  6. Anupama Gaur, Chandan Kumar, Shivam Tiwari, Pralay maiti “ Bio-waste orange Peel and Polymer Hybrid for Efficient Energy Harvesting”.(DOI 10.1016/j.egyr.2020.02.020)
  7. Anupama Gaur, Chandan Kumar, Shivam Tiwari, Pralay maiti “  Flexible, Lead-Free Nanogenerators Using Poly (vinylidene fluoride) Nanocomposites” (DOI 10.1021/acs.energyfuels.0c01143 )
  8. Anupama Gaur, Shivam Tiwari, Chandan Kumar, Pralay maiti. “  Polymer Biowaste Hybrid for Enhanced Piezoelectric Energy Harvesting “(DOI  10.1021/acsaelm.0c00197 )
  9. Shivam Tiwari, Anupama Gaur, Chandan Kumar, Pralay maiti “ionic liquid based electrospun polymer nanohybrid for energy hybrid. (DOI 10.1021/acsaelm.1c00307 )

10.  Chandan kumar, Amit biswas. “Surface modification of Ti-6Al-4V by electrochemical oxidation,” Journal of Biological Engineering Research and Review, 2016; 3(2): 35-39

 

 

Attended

1. Vivekananda Memorial Award for contribution in Green Technology, BioHeal-2023.

2. Oral presentation on “Energy Harvesting from Polyvinylidene Fluoride /reduced Graphene Oxide (PVDF/rGO) Composites for Biomedical applications” International Symposium on Functional materials: Energy and Biomedical applications (ISFM-2018),Chandigarh, India, April 2018.

3.  Presented poster on “Self-powered nanogenerators from bio-waste Polymer hybrids” in SPSI-MACRO, IISER, Pune, 2018.

4.  Presented poster on Energy Harvesting from Polyvinylidene Fluoride /reduced Graphene Oxide (PVDF/rGO) Composites for Biomedical applications in 10th APA, New Delhi, India, 2018.

5.  Attended18th International Workshop on Physics of Semiconductor Devices (IWPSD-2015) held at IISc Banglore, India, 2015.

6.  Participated in 6-dayEducation program on “ElectronMicroscopy & Microanalysis of materials” held at IIT-BHU, Varanasi, India, 2018

7.  Presented a Paper in the National Conference on Wireless Communication & VLSI design supported by IEEE MP Subsection at Gwalior, India in 2010.

8.  Participated in 6-dayEducation program on “ElectronMicroscopy & Microanalysis of materials” held at IIT-BHU, Varanasi, India, 2018.

9.  22 Days hands on training programme on Hardware & Networking by IT & training centre, Gwalior, MP, India: 21 march to 12 April 2007